K13 High-Flex Waterproofing Slurry is a high flexible 2-part acrylic-modified cementitious waterproofing material. The 2-components of Gomix K13 react chemically after mixing to form a hard and elastic film which bonds tenaciously to most concrete or masonry substrate to protect against possible ingress of water.
Where to Use
lInterior and exterior surface of wall, swimming pools, kitchens, toilets, balcony, water tanks.
lExternal areas parking deck, sealing precast joints and intersection of two concrete elements.
lProtection to lightweight blocks, hollow blocks, aerated blocks and roof.
l2 components eliminate risk of incorrect mixing ratio
lSeals lightweight aerated blocks
lSeals precast joints
lHighly flexible and elastic
lPut Gomix K13 High Flex Liquid into a clean mixing container.
lAdd the K13 High Flex Powder Gradually while mixing until a lump free plastic consistency is achieved. NO ADDITION OF WATER IS ALLOWED.
lIt is recommended that mechanical mixing (400-500 rpm) should be used for 2-3 mins to ensure proper dispersion of the components.
Product can be stored up to 12 months in an elevated, cool dry place in original packaging.
Elongation at break
Adhesion to concrete
> 1.2 N/mm2
Hardness Shore A
ASTM S2240 : 91
Improves water resistance of concrete
by more than 7 times @ 0.2kgf/cm2
NaOCI-0.5% NH4OH-1.25% HCI-3.7%
Flexible over 25mm diameter mandrel
Bridge cracks up to 2mm
Water vapour transmission
– < 25g/m2 /24 hrs
Pot Life (@30°C)
Approx. 2 hours
Drying Time (30°C) Touch Dry
Approx. 1 - 3 hours
24 hours after application
Gomix Building Materials (Guangzhou) Co., Limited specializes in the manufacturing and exporting of Tile Adhesive (thin set), Tile grout (tile joint filler), Wall putty (skim coat), Waterproofing slurry (cement based waterproofing), Thermal insulation materials (EPS/XPS board adhesive and base coat, fiber glass mesh, finish coating, etc), Textured coating (stucco, powder paint and acrylic textured paint), Emulsion paint (water based paint) cement admixture and so on.
Gomix Building Materials (Guangzhou) Co., Limited operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials.
Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process. GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
1.About Sample We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet. Tile adhesive(20kg/bag)packing with pallet specification: 64 bags/pallet = 1.28 MT/pallet 72 bags/pallet = 1.44 MT/pallet One full 20ft container max loading 27.6MT. With pallets can load 1360 bags, without pallet can load 1380 bags.