S8 Tile Primer (Normal Set) is composed of water based latex which has fine particles, strong penetration and superior adhesive strength and a variety of additives. It enables tiles to be firmly installed on a variety of substrates without getting hollowing problems.
S8 Tile Primer (Normal Set) is suitable for the installation of glazed pottery, glazed ceramic tile, vetrified tiles, rustic tile, marbles, artificial stone, sandstone, etc. It can also be used as an interfacial agent for walls or concrete surface.
lReady to use, easy application, greatly save labor costs;
lMature technology, supported by a large amount of projects at home and abroad;
lExtremely low costs, with costs less than a half of that with tile adhesive.
lLong lifetime, twenty years of quality commitment.
1.Tile back and wall surfaces should be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds and any other loose or contaminating materials.
2.Any hollowing, loose walls and protruding objects must be removed; patch uneven surface with cement mortar.
3.Brush tile primer evenly on the back of tiles or stones; make sure it’s completely covered.
4. Mixing portland cement mortar and prepare it for use.
5. Wait for around 15 minutes till the primer membrane color changes from milky white to transparent, spread cement mortar and hammer the tile to make sure it’s firmly set.
6.When necessary, it is recommended to brush primer to the wall substrate, so as to achieve better adhesive strength and performance.
Product can be stored up to 12 months in an elevated, cool dry place in original packaging.
Initial adhesive strength
Adhesive strength after soaking
Adhesive strength after thermal aging
Adhesive strength after freezing and thawing cycle
EU Standard: EN12004:2003
China Standard: JC/T547:2005
Gomix Building Materials (Guangzhou) Co., Limited specializes in the manufacturing and exporting of Tile Adhesive (thin set), Tile grout (tile joint filler), Wall putty (skim coat), Waterproofing slurry (cement based waterproofing), Thermal insulation materials (EPS/XPS board adhesive and base coat, fiber glass mesh, finish coating, etc), Textured coating (stucco, powder paint and acrylic textured paint), Emulsion paint (water based paint) cement admixture and so on.
Gomix Building Materials (Guangzhou) Co., Limited operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials.
Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process. GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
1.About Sample We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet. Tile adhesive(20kg/bag)packing with pallet specification: 64 bags/pallet = 1.28 MT/pallet 72 bags/pallet = 1.44 MT/pallet One full 20ft container max loading 27.6MT. With pallets can load 1360 bags, without pallet can load 1380 bags.