K9 Waterproofing Latex is a single component 100 % Acrylic Copolymer admixture to be used in combination with standard quality of ordinary Portland cement, which can enhance the waterproofing properties of cementations compositions.
Where to Use
USED AFTER MIXING WITH POLAND CEMENT
lWaterproof terraces, balconies, concrete roofs and cement toppings.
lWaterproofing before laying ceramic tiles and natural stone.
lSuitable for use on concrete, brickwork, blocks, render.
lPrevents surface water penetration when applied correctly.
lCan be over coated by exterior emulsion coating or cement based products.
lExcellent flexibility, Good waterproofing, alkaline and weather resistance.
lAll surfaces must be structurally sound and free from dirt, dust, laitance, grease, paint, wax, oil and any other loose contaminants.
lPrior to application, remove all sharp protrusions, which may pierce the membrane.
lAny gaps/voids in the substrate must be treated, such that the gap/void is fully supported and firmly filled out.
lThe mixing ratio is 20kg of K9 Waterproofing Latex mix with approximately 16Kg of Poland Cement (1:0.8).
lK9 Waterproofing Latex is poured into a clean vessel, and Poland Cement is added, then mixed with a mechanical mixer (350 rpm) until no lump is left and become a K9 cement admixture.
lIt is recommended to use low cycled (350 r/min) electrical mixer in order to make slurry.
Product can be stored up to 12 months in an elevated, cool dry place in original packaging.
Adhesion Results (Avg.)
ASTME-149 118 psi on open structure 124 psi on closed structure concrete 74 psi on steel formed concrete 128 psi on clay brick 112 psi on concrete brick
Tensile Strength Results (Avg.)
ASTMC – 190 332 psi at 100% R.H 116psi at 50% R.H
Flexural Strength Results (Avg.)
ASTMC – 580 472 psi
Permeability Results (Avg.)
ARMY C.E CRD-C 48-55 2.6 x 10-8cm/sec (coats) 1.7 x 10-8cm/sec (3 coats) Tested at water heads of 4.3ft to 178ft
Gomix Building Materials (Guangzhou) Co., Limited specializes in the manufacturing and exporting of Tile Adhesive (thin set), Tile grout (tile joint filler), Wall putty (skim coat), Waterproofing slurry (cement based waterproofing), Thermal insulation materials (EPS/XPS board adhesive and base coat, fiber glass mesh, finish coating, etc), Textured coating (stucco, powder paint and acrylic textured paint), Emulsion paint (water based paint) cement admixture and so on.
Gomix Building Materials (Guangzhou) Co., Limited operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials.
Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process. GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
1.About Sample We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet. Tile adhesive(20kg/bag)packing with pallet specification: 64 bags/pallet = 1.28 MT/pallet 72 bags/pallet = 1.44 MT/pallet One full 20ft container max loading 27.6MT. With pallets can load 1360 bags, without pallet can load 1380 bags.